Posted in Tech

All HUAWEI Qualcomm FRP/Google Lock Bypass Android EMUI 8.2.0 146 and above – Test Point

All HUAWEI Qualcomm FRP/Google Lock Bypass Android EMUI 8.2.0 146 and above – Test Point. Request HalabTech Tolol V9 Final – Click here to download the Tool Turns off the phone you need to open the Back and disconnect the battery Open the HalabTech Tool – click Qualcomm- connect the USB Cable with Computer and Shorting the points on the motherboard with clips or wires as picture# to active the Test Point. After you did the test point,the computer should be found new driver as Qualcomm HS-USB QDLoader 9008. After the Driver installed, then go back to HalabTech tool- Fresh the Com Port  and choose the Qualcomm HS-USB QDLoader 9008 Select the model you have or the simalr one,then click Remove FRP It will process and Erasing FRP … OK show at Left of the tool. Disconnect the cable and connect the battery, Turns on the phone and the FRP be Removed. Put any screws and cover Back,Done If this method doesn’t works for you, then try to upgrade the system to 9.0.0.187 or 9.1.0 then use other metholds following or search on my website.thanks Enjoy!!   if you have one on 8.1/8.2 use this method 1 for EMUI 8.1/8.2   or   Use this method 2 for EMUI 8.1/8.2 if you have one on 8.2.0.142, use this method for EMUI 8.2.0.142 if you have one on 8.2.0.143 or 144, Use this method for EMUI 8.2.0.143/144 if you have one on 9.0.0.187 , Use this method for EMUI 9.0.0.187

Posted in Tech

All HUAWEI FRP/Google Lock Bypass Android EMUI 9.0.1 WITHOUT PC,No TalkBack

All HUAWEI FRP/Google Lock Bypass Android EMUI 9.0.1 WITHOUT PC – No TalkBack Turns on the phone Connect with WIFI. Go Back to the first page of the setup wizard,click the emergency call Dial 112 then call and press the 4 key at same time (it may Need to try several times),it will appeals the calendar if you get it. Once you on the calendar,click the + to add event Type youtube.com on the tile then confirm to save. Click the Event you just save,click the youtube.com and it will be appeals youtube Click Share on the any youtube video-choose Gmail-add a email address-Outlook,Hot mail and Live(enter your hotmail account) When finish enter the email account,click Take me to Gmail-Click the Option at Top-Right-Settings-Manage Accounts,it will be appears the settings of the system click system-Reset-Reset all settings, Done Enjoy!!   if you have one on 8.1/8.2 use this method 1 for EMUI 8.1/8.2   or   Use this method 2 for EMUI 8.1/8.2 if you have one on 8.2.0.143 or 144, Use this method for EMUI 8.2.0.143/144 if you have one on 9.1 , Use this method for EMUI 9.1 if you have one on 9.0.0.187 , Use this method for EMUI 9.0.0.187

Posted in Tech

All HUAWEI FRP/Google Lock Bypass Android EMUI 8.2.0.142 WITHOUT PC – EASY WAY

All HUAWEI FRP/Google Lock Bypass Android EMUI 8.2.0.142 WITHOUT PC – EASY WAY Turns on the phone Connect Wifi (you can use Hotspot,because you will need to turn off the wifi on next step), Then Connect Click Next Button and then turn off the wifi hotspot immediately It will pass the Google Account login page Now click next to setup up the phone Once you finished the setup wizard,go to settings-system-reset-reset all the settings Reboot the phone and Done !! Enjoy!! This was tested works on 8.2.0.142 if you have one on 8.1/8.2 use this method 1 for EMUI 8.1/8.2   or   Use this method 2 for EMUI 8.1/8.2 if you have one on 8.2.0.143 or 144, Use this method for EMUI 8.2.0.143/144 if you have one on 9.0.0.187 , Use this method for EMUI 9.0.0.187    

Posted in Tech

All HUAWEI FRP/Google Lock Bypass Android EMUI 8.1/8.2 WITHOUT PC – EASY WAY 2

All HUAWEI FRP/Google Lock Bypass Android EMUI 8.1/8.2WITHOUT PC – EASY WAY 2 Turns on the phone Connect Wifi (you can Hostpot,because you will need to disconnect the wifi later), set up the wifi By Using Advance Options And Use Manualy Proxy Settings.(Proxy hostname : yatoon.com Proxy port : 8080 )Then Connect Click Next Button And Wait Sometime Here For Show Network Error Like This (No Interet access.please check the router or consut your network service provider.) Click the ! sign, it will appeals the Help page Click the Learn more,it will appeals the Select Country/Region page (it will need to wait seconds) Now turn off your wifi (you can turn off the hostpot or change the password) Go back to the phone and choose your contury/Region. Now it will shows wifi setting due to the you turn off the wifi,so click the wifi setting and connect your wifi with normal. It will go to Hicare,just click Next and agree to enter the Hicare. Click the Search bar and enter something wrong like aaaaaa or bbbbbb.then click search you will see Suggestion – Email- and Long hold the gmail icon then it will be appeals the Gmail App info page click notifications-More settings-Click the Option at Top-Right-Settings-Manage Accounts,it will be appears the settings of the system. click system-Reset-Reset all settings, Reboot the phone and Done!! Enjoy!! if you have one on 8.1/8.2 use this method 1 for EMUI 8.1/8.2   or   Use this method 2 for EMUI 8.1/8.2 if you have one on 8.2.0.142, use this method for EMUI 8.2.0.142 if you have one on 8.2.0.143 or 144, Use this method for EMUI 8.2.0.143/144 if you have one on 9.0.0.187 , Use this method for EMUI 9.0.0.187

Posted in News

推荐一个海外观看电影电视剧的网站 欧乐影院 https://www.olevod.com/

网站链接 欧乐影院 https://www.olevod.com/ 这个影视网站内容很多,世界电影电视,中国大陆,港台,日韩,动漫等包罗万有, 很多最新电视剧都有,譬如 《上阳赋》,《有翡》,《黑白禁区》,《流金岁月》,《大江大河2》,《燕云台》等等都有,更新及时,清晰流畅,推荐!!   注:本站只推荐,欧乐影院所有内容与本站无关,还请注意

Posted in Tech

ALL Huawei 2019 EMUI 9.1/TalkBack 7.3.0 FRP Bypass -WITHOUT PC

ALL Huawei 2019 EMUI 9.1/TalkBack 7.3.0 FRP Bypass – WITHOUT PC  Hold and Press the Volume Up+Power button and connect with Charge Cable at Same time, release until you see the Huawei Logo Click Wipe Data/Factory Reset-type YES -Factory reset- Wipe data/facotry reset Wait until Reset successful Click Safe mode and the phone will be reboot Wait until the phone enter system,click settings-system-Reset-Reset all settings Reboot the phone and Done! If fail on the safe mode, you may need to update the firmware first Hold and Press the Volume Up+Power button and connect with Charge Cable at Same time, release until you see the Huawei Logo Download lastest version and recovery-Download and recovery Connect with your WIFI and it will be download the lastest verison automatically Wait until download and Recovery success, the phone will be reboot. After the reboot, please power off the phone and do the method as above. Enjoy!!

Posted in Tech

Install Sony XAV-AX5000 for 2013 Honda CR-V EX-L (No Navigation version)

Install Sony XAV-AX5000 for 2013 Honda CR-V EX-L (No Navigation version) First at all, Whenever you mess with car electronics, the first thing you need to do is to remove the negative terminal of your car’s battery,the best is remove both negative and positive. Disclaimer: all operations may be risky, so please ask professional do it or bear your own risk!! We are not responsible for any risks or responsibilities!! what will needs: SONY XAV-AX5000 Scosche LPHA15 (Honda LINK+ Interface with Steering Wheel Control Retention) Scosche HA1714B ( 2012-Up Honda CRV ISO Double DIN & DIN+Pocket Dash Kit) Scosche HAA2B ( 2010-Up Honda Antenna Adapter) Electrical Tape + Electrical Industrial and Electrical Harness Wiring Friction Tape you need screwdriver and may need Car Panel Removal Tool too RCA Cable     1. Take the old Head unit out https://www.youtube.com/watch?v=MtTw4DURgGw 2. connect the cable from SONY AX5000 with Scosche LPHA15,it is basically matching the color of the cables together,and taped them.   3. Connect the SONY AX5000 to CR-V (three connectors need to connect,left the white color one,because the SONY AX5000 has not connector match it. ),next you will need to remove the OEM Bluetooth connector from the Bluetooth Module and plug the  Bluetooth connector from Scosche LPHA15 to bypass the module. (the OEM Bluetooth Module’s location under the shift lever,part number 39775-T0A-A50),connect this Bluetooth then can you setup up the make call, hand up,voice buttons of the steering wheel control on SONY AX5000. Once open the panel and bezel,you will see the Bluetooth Module inside like this following: Now you will be able to set up the custom streering wheel control setting on SONY AX5000!!   At this point,the Rear View Camera still not shows on SONY AX5000 yet, you will need to spliting the Video cable from the Upper iMID small Display to connect to SONY AX5000,let’s do it!! To spliting  a connector to SONY AX5000 from iMID Display. you will need a RCA cable, cut the RCA cable and get the wires ready, then tape the Vidoe Center wire to Pin#19 and the Ground wire to #18 from the 32 Pin Connector as picture above,final connect the RCA connector to SONY AX5000, Done! As the picture follow, the #1 will connect to Pin#19, #2 will be connect to Pin#18!! Here is the information posted by jacan20 from CRV Owner Club (Thanks so much for the information) “I cut off one of the ends of the rca cable and stripped away some of the insulation. A rca video cable is comprised of a center cable (video positive) that is surrounded by many very thin ground wires. These ground wire are very fragile and annoying to work with; be very careful with them! Carefully twist only the ground wires together and crimp a male plug of a t-tap on it. Crimp another male end onto the center data positive wire. Inside the car, attach the female part of a t-tap onto the wire that leads to pin 18. Attach another […]

Posted in Tech

Change the hard drive format to MBR or GPT to install Windows 7,8 or 10 !!

To wipe and convert the drive by using Windows Setup Turn off the PC, and put in the Windows installation DVD or USB key. Boot the PC to the DVD or USB key in UEFI mode. For more info, see Boot to UEFI Mode or Legacy BIOS mode. When choosing an installation type, select Custom. On the Where do you want to install Windows? screen, select each of the partitions on the drive, and select Delete. The drive will show a single area of unallocated space. Select the unallocated space and click Next. Windows detects that the PC was booted into UEFI mode, and reformats the drive using the GPT drive format, and begins the installation. To manually wipe a drive and convert it to GPT: Turn off the PC, and put in the Windows installation DVD or USB key. Boot the PC to the DVD or USB key in UEFI mode. For more info, see Boot to UEFI Mode or Legacy BIOS mode. From inside Windows Setup, press Shift+F10 to open a command prompt window. Open the diskpart tool: diskpart Identify the drive to reformat: List disk Select the drive, and reformat it: select disk 0     —- 0 is the disk you want to format clean convert gpt       ( convert mbr if you want to bmr format) exit Close the command prompt window. Continue the Windows Setup installation. When choosing an installation type, select Custom. The drive will appear as a single area of unallocated space. Select the unallocated space and click Next. Windows begins the installation.